A Dymo Label Buddy is the affordable, private labeling machine. By creating an easy-to-read label it will help you in organizing the home office quickly, it is not just for your ease of use, but for anyone who wants to come in and also find things. Reloading the Dymo Label Buddy is the simple process. Here is more information for you.
For the first step, you should pinch a tape that will be poking out of a tape feed slot of the replacement cartridge, then pull it out the inch further.
For the second step, you have to hold the Label Buddy therefore the back will be facing you. You can see a cartridge cover the extending off the back, perpendicular to a body of your machine. Just below where a cartridge cover will meet the back, you can see the small tab. Then, push it in and also up in order to open a hinged cartridge over.
For the next step, you can pull an old cartridge out. After that, insert your new cartridge. You need to ensure that a tape-feed side will be facing down to your machine, with a tape exiting a cartridge and also feeding by the tape slot at the bottom. Then, close a cartridge cover and also press it down until you will hear the tab click into a locked position.
For the last step, turn your Label Buddy over therefore it will be facing up. After that, hold a handle with both of hands, to make sure that both of thumbs will be on the top of a handle. Then, press on a handle twice in order to feed a tape by your machine. If the tape feeds, the Label Buddy will be ready to use. If the tape will not feed when you are pressing down on a handle, the cartridge will be not loaded with a tape-feed side that is facing down.